CONTEC SP100B hospital Digital Portable Spirometer patient diagnostic WIFI

Description

Product Introduction
The pulmonary function meter is a portable pulmonary function test device that uses a differential pressure collection method to measure more than 100 parameters of four items: FVC, SVC, MVV, and MV. It is suitable for multiple scenarios such as hospitals, clinics, and home vital capacity, maximum ventilation, and pre- and post-medication stimulation tests. It can provide users with pulmonary function test results and provide a basis for medical staff to make diagnoses.
Product features
1) Differential pressure detection technology principle, equipped with professional lung function software, can measure FVC, VC, MVV, MV, a total of more than 100 parameters;
2) Can detect exhalation and inhalation parameters, real-time display curve;
3) Automatic measurement of temperature, humidity, atmospheric pressure for BTPS correction;
4) Measurement quality control function, software automatic quality control rating;
5) Measurement calibration control function: capacity calibration, three flow rate verification;
6) Has the function of displaying the best value of multiple measurements;
7) Can display the tester's condition through the ratio of measured value to expected value;
8) Flow rate-capacity graph, capacity-time graph display;
9) Data storage, deletion and information review;
10) Trend graph display;
11) Capacity, flow Speed ​​over limit information prompt;
12) Lithium battery powered, rechargeable and with charging prompt;
13) Battery power status indicator;
14) Multiple estimated values ​​to choose from;
15) Support bronchial dilation test and bronchial provocation test;
16) Has lung function assessment function;
17) Has follow-up questionnaire function;
18) Has patient information entry, management and query functions;
19) Built-in 210mm thermal printer, can print and output test reports;
20) Can be connected to an external printer to print and output test reports;
21) 10.1-inch capacitive touch screen;
22) Has wifi function;
23) Built-in ID card reader; (optional)
Product performance
Display mode: 10.1 inches Color LCD display
Display resolution: 1280*800
Volume measurement range: 0L~10L(BTPS)
Maximum indication error: ±3% or ±0.05L (whichever is greater)
Flow rate measurement range: 0L/s~16 L/s(BTPS)
Maximum indication error: ±5% or ±0.17L/s (whichever is greater)
Power consumption: P≤150 V·A
Power supply: DC14.8V rechargeable lithium battery or AC220V 50Hz
Safety type: Class I or internal power supply equipment, BF type applied part
Accessories
1 pulmonary function probe
1 instruction manual
100 mouthpieces (50 round mouths, 50 flat mouths)
1 wire assembly
1 recording paper roll
1 ground wire
1 nose clip (optional)
Physical characteristics
Dimensions: 340mm(L)× 320mm(W)×86mm(H)
Weight: about 4000g