Icom M400BB Black Box VHF Marine Tranceiver w/White Command Mic

Description

Icom M400BB Black Box VHF Marine Tranceiver w/White Command Mic
Icom Quality with a Small Footprint
The IC-M400BB consists of a two-piece, black box configuration. All function control including DSC operation, can be made from the CommandMicIV
TM
, HM-195B/SW, and the RF unit, IC-M400BB, can be installed in an out-of-sight place.
The new menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons.
The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly.
The IC-M400BB has a built-in 10W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker.
The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.
When connected to an external GPS receiver, current position and time are shown on the CommandMicIV display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity.
When connected to the optional MA-500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA-500TR.
Additional Features:
MarineCommander
TM
compatible
AquaQuake
TM
water draining function
IPX7 submersible protection both for IC-M400BB and HM-195B/SW (1m depth for 30 minutes)
Dual/tri-watch function for monitoring Ch.16 and/or call channel
Priority and normal scan
Specifications:
Display
2'' LCD on Handset
Control
Pushbuttons and rotary knob on handset
Power
25 Watts, 1 Watt
Remote
Single CommandMic handset only.
Interface
NMEA 0183 in/out
Other
10 Watt external speaker/loudhailer/fog horn (speaker required)
Dimensions
Transceiver: 8.5''W x 3.1''H x 4.9''D; Wt: 1.83 lb. Handset: 2.7''W x 5.7''H x 1.5''D; Wt: 14 oz.
Warranty
Three Years
In the Box
M400BB Transceiver
CommandMic IV w/ 20' cable
Installation Materials
Owner's manual